|
|
|
TH Series commercial reverse osmosis systems are designed
to deliver 12,000 to 24,000 GPD (8-16 gpm)
|
- ABS control panel, NEMA 4X electrical enclosure, UL/CSA
- Microprocessor control:pre-treat lockout, low feed pressure, product tank full, high TDS
- Microprocessor monitoring: product TDS
- System status and warning lights
- Gauges: Vessel array in/out (2) and filter in/out (2). SS gauges with bronze internals, glycerin filled and mounted on front panel
- Valves: 316SS brine and recirculation valves, globe type, mounted in the last brine line, on front panel
- Prefilter:Big Blue with 1.5" FPT ports for a 4.5"X 20" 10-micron element
- Pump: 304SS main pump wetted parts
- Frame: Powder coated steel construction on levelers
- Schedule 80 PVC plumbing and brass hose fittings
- TEFC Motor
- PVC Vessles
- Low energy membrane elements
- Flow monitoring for product, brine and recirculation
|
|
|
- pH Monitoring
- Pump: 316 SS for high TDS feed streams>5000 ppm
- Gauges: 316SS case and internals, glycerin-filled
- Flushing systems: high flow feed water or product water placement of brine
- Blending system: filtered feed water into product stream
- Frame casters
- 316 SS Vessels (300 psi rated)
- High rejection membrane elements
|
- Pre treatment
- Chemical injection for chlorine removal, antiscalant
- UV sterilization
- MMF auto-backwash filtration
- GAC auto-backwash filtration
- Cartridge or bag filtration
- Softener
- Buffer Tank
- ORP meter for chlorine monitoring
- Boost pump
- Post treatment
- Chemical injection for chlorine
- UV sterilization
- GACF auto-backwash filtration
- Cartridge or bag filtration
- pH control
- Product storage: atmospheric or pressure
- Pressurizer systems
|
| Product Rate |
8 to 16 gpm (1.8 - 3.6 m/h) |
| Rejection |
95-98% |
| Recovery (without recycle) |
30-65% |
| Design Temperature |
68 degrees F (20 degrees C) |
|
| Membrane Type |
Thin-film, spiral wound,
low energy
|
| Number of Membranes |
6-12
|
| Membrane element size |
4" X 40"
|
| Array |
2X1 to 4X2
|
| Number of pressure vessels |
3-6 rated at 225 psi (15.5 bar)
|
| Membranes per vessel |
2
|
| Size of pressure vessels |
4" ID X 84" L
(10 X 213 cm)
|
| Pump |
Goulds SVB (304 SS), vertical 1.25""
pipe Victaulic-type inlet/outlet
|
| Motor |
3 to 7.5HP, TEFC
|
| Electrical |
High/low voltage, 50/60Hz, 3-phase
|
| Overall Dimensions |
95"W X 30"DX 46.5"H
( 241 X 76 X 118 cm)
|
| Weight |
450 to 750lbs
(204 to 340 kg)
|
|
| Water Pressure |
Minimum 15 psi (1.03 bar) |
| TDS |
5,000 ppm max |
| Temperature range |
10 degrees F(5.6 degrees C)
design temperature |
| Chlorine level |
Dechlorination reqd. if>0.1 ppm |
| Turbidity |
<1 NTU |
| SDI |
3 max |
|
|
|
|
|
|
P.O. Box 5241, Modesto, CA 95352 Phone: (209) 524-6182 Fax: (209) 524-7411
|
|
|
|
|
